Headrest frame, in total 4 pipes with a length of 48 cm, for rear seat ID/DS
Headrest frame, in total 4 pipes, for rear seat ID/DS. The rear seat has never had headrests, but we developed these frames some time ago. We liked them so much that we had a second series made. While supplies lasts.
322.958.500: Mud flap set behind front jack support, Left and Right, for Citroën ID/DS.
Why not stainless steel parts? Because we don't want your chassis to rust. This happens in places where stainless steel and metal come into contact with each other in a humid environment. It is also called "galvanic corrosion".
322.369.502: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For BREAK. ID/DS.
322.369.502: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For BREAK. ID/DS.
322.369.502: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For BREAK. ID/DS.
322.369.500: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For PALLAS. ID/DS. -
322.369.500: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For PALLAS. ID/DS.
322.369.500: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For PALLAS. ID/DS. -
322.369.501: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For NON PALLAS. ID/DS.
322.369.501: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For NON PALLAS. ID/DS.
322.369.501: Set of strips (8 pieces) made of stainless steel with white rubberces) en Inox avec caoutchouc blanc, Width= 33 mm. This set can be glued or fastened with double sided tape. It has no holes made in it. For NON PALLAS. ID/DS.
Half mounted front seat brown leather Citroën ID/DS
Back of front seat with metal springs, prepared for narrow headrests, for leather, model with turn knob, including back piece, trimmed in dark brown leather,.
Front seat half mounted pallas 70-73 blue cloth Citroën ID/DS
Seat cover set for Pallas front seat, mounted on new back frame with new foam pieces, prepared for narrow headrests, blue cloth (central part two tones) for seating part + back of front seat + closing panel (in whitish leatherette)
Front seat fully mounted pallas 70-73 red cloth Citroën ID/DS
Front seat in red cloth (central part 2 tones) mounted on base frame, without wheel, without back cover plate, without preparation for head rest {68->}
Seat cover set, front and rear, blue denim, open sides, 2CV.
Set of front seat + rear seat in denim leatherette (open side). This is a front seat and a back seat. Denim is the name of this color leatheretet, a blue-ish color with a jeans emboss. It is very long lasting. The vinyl is made especially for us. We have
